Exotic Implants.
-[DataJY]- ©2010
These “Exotic Implants” are awfully unusual. Yet, we are perfectly able to examine these very precisely. People find these objects (exotic implants) by mistake, or by x-rays related to another cause. Sometimes many years (2-15) after they have been placed there. Some other times because they feel something inside their body.
When the removal procedure is engaged, the physician can not extract the object alone. A significant part of the area, biological tissue directly around it, has to be taken away with the object (it is a matter of millimetres; mm, not inches!).
Because (biological description):
1- Nerve fibres are connected to the object:
Considering our actual knowledge, this is an aberration or abnormality. Nerves (neuron) do not develop after being born, and even less on, or connected to, an inert material. Consequently, the patient feels pain when the physician tries to cut it away.
2- The object is wrapped with skin layers (derma):
The presence of in-depth skin (under or in the derma) is quite surprising. Everybody knows about organ rejection (transplant) as the inherent reaction of the body to any exotic matter. When one is wearing a watch or a necklace though, the skin does not “reject” that “foreign article” or object.
This is the technique Outer Foreigners are making use of:
They are taking samples of the skin to the patient. They are "fast-growing it" in some way and then they are enveloping the object with this tissue membrane, or fine pellicle. The outer skin of the patient enveloping the object isolates it from the internal tissues, and the reject reaction can not occur. Biologically speaking, the body does not detect any foreign matter because of that biotic membrane.
This combination of bio-molecules is a first in the history of biology.
And this concept is foreign to earthlings.
3- The normal fibre-tissues envelope (fibrosis, proteins/collagen) does develop itself around the object. And also between the object and the surface of the area (the skin). However, without developing any inflammatory reaction. These are the reasons why physician can not remove the object alone. It is linked with some tissue material, and with nerve fibres on the area.
4- The micro-veins around the piece have been cut and blocked, at the moment when it was put in place. A kind of cauterization which is unknown to us.
5- The membrane, which is enveloping the entire piece, is made of protein coagulants, keratin or degenerated surface skin and grains (hémosidérine). This protein coagulant (hémosidérine) is a derivative of haemoglobin and it is carrying Fe ions ++. Since there is/was no internal bleeding (haemorrhage) on the area, the presence of so much iron (Fe) is startling.
6- The area (skin and under-skin) shows distinct signs of circumscribed degeneration to the elastic tissue (Elastosis). This is related to degenerative changes in the dermal connective tissue. Often common to sun-exposed skin of old persons, or in those who have chronic actinic damages. This photonic elastosis (like sunburns) [thixantropie, élastose photonique] is a result of desiccation (dehydration) from exposition to very intense radiation of some sort (like ultraviolet). And the most peculiar thing is, this effect is strictly limited to the surface of the skin, and the internal tissues between the skin and the object. Everything around is perfectly normal. This is indicating that a very precise instrument was utilized to deliver a micro thin beam (microns scale).
7- Though it shows several other (minor) symptoms, the skin presents no entry point for the insertion of the object. From the internal layouts, we can see how the exotic implant was placed there, however the outer skin has been regenerated.
We can conclude this biological description by saying that this is a procedure of advanced bio-mineral graft (to implant or transplant) using components of the host to neutralize the host’s immune system. THIS concept does come from Outer Foreigners visiting us.
Physical description:
8- The object itself is made with micro-layers (like microchips) of multiple simple metals (chemical) we find on our planet.
Al, Ba, Ca, Cu, Fe, Mg, Mn, Na, Ni, Pb, Si, Ti, Zn.
Most abundant: Cu, Ca, Fe, Ba, Al.
Less abundant: Ma, Mn, Pb, Ni, Si, Na, Zn.
Only traces: Eu, Ru, Sa.
9- However, the proportion in which they are assembled and organized totally defies our technology. We can see it, we can analyze it, but we can not create that sort of a micro detailed sculpture.
With the electron microscope, the parts clearly appear structured.
A structure in layers with an axis of very hard iron, and a conducting surface (electrical; Fe ions). A very complex mixture of metals (chemicals). The metallic objects have a needle stem (10x2 mm) with a magnetic iron carbide heart, and a complex mineral coating. They are indistinguishable between them. Since these objects have a precise global microstructure, the technique for studying these corresponds to the study of smart cards, or transistor micro-plates.
The horizontal stem includes a magnetic iron heart harder than carbon steel with an envelope of iron (phosphorus), and 11 additional elements assembled in a way that defies any of our metallurgical procedure. Part of the envelope forms a crystalline cylindrical ring wrapping the internal stem. One end of the horizontal stem is round, and the other end is made of micro-thin wires, sometimes looking like hooks. There is a cavity at the centre, which accommodates precisely the end of the vertical part.
The external layer (surface of the object) is designed with micro grooves by which the skin membrane (bio-envelope) is intricately attached to the object. This envelope became so hard it is impossible to cut it with the scalpel. Like a strong keratosis, an excessive growth of horn-like tissue of the skin (overgrowth and thickening of the cornified epithelium).
The nerve fibres are connecting the object (from different areas) to different elements of the internal body:
- Tendons:
(a tough band of fibrous connective tissue that usually connects muscle to bone),
- Articulations:
(where two or more bones make contact),
- Phalanges:
(phalanx bones, those that form the fingers and toes).
Looking at the Ni/Fe ratio, the N.M.T. Laboratory, which was unaware of the origin of the objects, evoked meteorites. When they learned these had been extracted from human bodies, they suggested dental ceramics. But that option is excluded because dental ceramic causes strong inflammatory reaction.
We are in the presence of complex miniature structures (exotic implants) made with a mixed nature of bio-minerals, having an electromagnetic function, and locally connected with nerve fibres (neuron).
The Purpose:
Because of Outer Foreigner’s general technology, there is no obligation for them to place implants. However, it is obvious that they are utilizing these exotic implants for some reasons. In that case, the only logical hypothesis is they are utilizing Remote Bio-Mineral Micro Capacitive Sensors, for recording data related to human (humanoid) body positioning, motion detection and measurements. Considering the emitting function (electromagnetism, Fe) and the nerve connections to specific parts (left side) of the articulation system.
Simply try to eat food with Chinese sticks and you will understand how difficult it is to assimilate other people’s cultural specifics. Furthermore, this kind of data would be necessary for later use in three (3) dimensions movement simulators, for example.
In short, Outer Foreigners are placing motion analysis capture devices, in situs/in vivo, while bringing us earthlings to the edge of our knowledge frontier when working to remove them.
Our micro-engineering technique is just not there yet. But very close!
Like when one can look at what is on the other side of the fence.
It seams so imminent and so distant at the same time…
I find it fascinating!
-[DataJY]- ©2010
Ref.:
http://www.alienscalpel.com/
http://www.youtube.com/watch?v=uTjtH4q6LQI
The A.M.V.C. MODEL (Text Page)
TEXTS DISPLAY:
Subscribe to:
Post Comments (Atom)
Outer Foreigners Vimana
I find it absolutely fascinating to analyze how the pilot is reacting and operating, by examining carefully the movements of the craft (vimana).
No doubt they are monitoring a large part of the sector while in flight, because they are responding to people utilizing a video camera (adjusted positioning). Often times they slow down and change course. When the event is more or less isolated and the subject/witness is calm enough, the pilot maneuvers the vimana toward the camcorder. More than that, they operate in function of what is in the viewfinder! The movements the craft makes shows clearly the pilot is able to actually see what the cameraman is seeing. To do that, one of their sensor-rays are tuned to the video signal inside the camera, between the CCD pick-ups and the viewfinder monitor. It picks up that signal and displays it on a screen inside the vimana for the pilot to look at it. With that, he can move his craft slowly to the left waiting for the witness to pan and follow. Then he does the same to the right.
Example (adjusted positioning):
See the video at the end of this text.
Moving very slowly or just standing there for minutes while being video recorded shows how much they are in control, they have the hand. Both takes showing them vessels accessing mass inversion state and disappearing to our visual senses (wavelengths) are certainly intentional. Like would do a movie director, they wait precisely the moment when the shot is perfect: not too far, not too close, in focus, the camera not oscillating, quite standard framing.
A laser beam is reflected by the topology of the site, or by any object. This could be utilized for mapping an area like our satellites are doing on planets. However, outer foreigners have much better means for that purpose. Depending on the changes in wave length to the reflected part of the beam (returned signal), they can be measuring components in the soil and vegetation. It is always difficult to discern what it is exactly they are probing and recording because we do not perform those types of operations. When the laser beam flashes bright on the camera lens, it means they are directly pointing at it. Again, they know they are being video recorded and they let us know that. This is a form of interaction!
Of course with their technology, they could avoid being spotted and always remain hiding or leave long before anyone comes near. Being perfectly aware outer foreigners are totally allergic to sudden unexpected occurrences, unforeseen outcomes, I do understand they have a natural tendency to control and to plan everything down for reducing the number of probabilities. Thus, the real video shots are voluntary contributions from their part.
Since real occurrences happen unexpectedly (on the witness part), the camera does not stand on a tripod. The image is severely unstable (even more when zooming very close). But the “object” itself is perfectly stable on the picture frame. The three (3) dimensional positions and environment: the Background (clouds) always remain behind the “object”, the Foreground (trees) always remain before the “object”, and therefore, the Object location is consistent. Because the “object” is a vessel, it has a Mass and an Inertia. Regardless what kind of propulsion is utilized, it has to struggle with the mass. This means a vessel can not stand nor translate at low speeds absolutely motionless. Especially while hovering. Constant adjustments has to be applied (compensations), no matter how small they are. Piloting these vessels is like operating a helicopter, which is inherently unstable, except theirs is done by computers. Therefore, the “object” oscillates slightly up and down, and to the sides. Because the camera is unstable (sadly), this is often times difficult to discern, though it is always there. Also, the vessel will bank a little right and left, and readjust regularly as if it was trying to stay horizontal on a needle. This attitude is very different than an object being suspended by a string (on the top), the oscillations would be inverted. The inertia is the tendency of an object (mass) translating to keep on moving in the same direction. It can be seen as a “resistance” to change its direction. A vessel at low speeds will show a curve as it is modifying its trajectory (turning) or its altitude (up and down). It will not invert suddenly its direction of translation. Translation at ultra-high speed is very different. And since it requires advanced technological details, lets only consider the transition from low to ultra-high speed, and vice versa. When a vessel suddenly changes to ultra-high speed from slow speed, it goes away in a straight line or a constant curve, and its size reduces correspondingly to the distance. The disappearing (fading out) of the vessel is very laborious to explain as well (mass polarity inversion). Lets only consider that there must be no alteration to the image (frames, pixels), like pasting and erasing. The pixels definition remains unaltered. And since the electromagnetic effects are affecting the camera pick-ups (CCD), it is adding to the confusion. [This is the reason why films (no CCD) are the best] Finally, the “faint halo” surrounding the object shows a rotating composition. I know what direction a current is going inside an electromagnetic field, this is pure physics, thus the rotation has to correspond with that. These five (5) elements are extremely difficult to simulate. Only huge complex computers (like those utilized in weather forecast) could model all these at the same time, in a manner that it would be practically impossible to sort it out. And these are not available to freaks (hoax creators)!
Video shots of real outer foreigner’s vimana and probe are very rare. Only expert’s eyes can spot those among the vast quantity of hoaxes. To the best of my abilities, only those I suggest here are presenting each and every characteristics to real outer foreigner vimana.
A- Display of presence (China):
B- Responding to a cameraman (Milan):
C- Observing (France):
D- Just being seen (Argentina):
E- Display of presence:
F- Responding to a camera (Texas):
G- Caught probing a site (Italy):
H- Playing with the cameraman (Glasgow):
I- Display of presence (Nan Jing):
J- Transiting (Sarajevo):
K- Surprising the people (Bosnia):
L- Examining a building:
M- Laser-Beam (2010):
Addenda -[DataJY]- © 2011.
Since several communications (email) have been questioning how such a vessel could be piloted, I am publishing here my general response to that (For more details, see: The A.M.V.C. Model; Electromagnetic Field Drive Vehicle section).
Vimana craft Controls.
From a pilot’s point of view experienced with both fixed-wings and rotary-wings aircrafts,
Understanding the inherent dynamics in the EM Field Drive mechanism (electromagnetic properties: attraction/repulsion) and considering Maxwell’s equations,
Considering Lieutenant Plantier’s description,
In accordance with numerous accounts from witnesses,
controlling a vimana craft is very similar to operating an helicopter.
Though basic principles are extremely different in their nature, both results are similar: the main propulsion force acts downward directly below the craft.
- The helicopter has horizontal blades (horizontal plane) and its clockwise rotation creates lift (pushing downward). The rotation of the blades (horizontal plane) is maintained at a particular speed, which does not change. Adjustment to the blade's angle of attack (AoA) modifies the strength of the lift (pushing downward) so the helicopter climbs up, holds level altitude, and descend. Changing the angle at which the horizontal blades are turning on the axis (its plane), its inclination or tilt determines the direction of translation to the craft. When the horizontal rotation plane tilts forward, backward, to the right or left, the helicopter moves to the same direction. Because of the inherent inverse rotation reaction on the craft from the horizontal blades turning at high speed (the craft tends to rotate counterclockwise), there is a set of blades positioned on a vertical plane (to the back) for compensation to this rotation reaction by adjusting the blade’s angle of attack. Also, adjusting these vertical rotating blades makes the helicopter turn right or left more precisely. Thus, there are three main controls: 1- The Lift (Collective, or up and down), 2- The Direction of translation (Cyclic, or direction by tilting the entire craft), 3- The Compensation to the counter-rotation (Anti-Torque or pitch of the tail rotor blades).
- The vimana (coil-like mechanism) has a circular particle accelerator (like a ring) around a central pole and rotation of particles creates a miniature magnetosphere that reacts with any local magnetosphere (repulsing: pushing downward). The speed of the particles in the accelerator must be constant (light speed, electricity) for maintaining the miniature magnetosphere. Because the repulsion force or effect (acting downward and pushing upward) is constant by definition, a Damper-screen is positioned below the vimana craft. It functions like a diaphragm in a camera, but its diameter is adjusted rather than its aperture. This Damper-screen is acting as an attenuator to the repulsion force, it reduces its effect (damping) where it is positioned. When the vimana craft is on the ground and the particle accelerator is powered, the Damper-screen is set to its wider diameter (below the craft) and its attenuating effect is the strongest, so the repulsion effect is totally suppressed. Reducing the Damper-screen diameter allows more repulsion effect outward (below), so the vimana craft lifts up. Maintaining this configuration makes the vimana hold altitude. Sliding the Damper-screen forward allows more repulsion effect backward, the entire vimana craft tilts toward the front and translates in that direction. Because the repulsion effect is not centered under the vimana anymore, the intensity directly below is weaker. For maintaining altitude, the intensity of the repulsion effect must be increased, so the Damper-screen diameter is reduced a little more for compensation (increasing the repulsion effect below the vimana craft). Maneuvering the Damper-screen diameter (degree of attenuation) and position (direction of repulsion) under the vimana craft allows to control its attitude and speed. Thus, there are two main controls: 1- The Lift (Damper-screen diameter, or up and down), 2- The Direction of translation (Damper-screen position, or direction by tilting the entire craft). Compensation to the counter-rotation (Anti-Torque) is not required. This mechanism is acting like a gyroscope, it makes the overall structure of the vimana craft (nose) follow the direction of translation. However it can be made to rotate on itself (yaw) independently.
The major difference between an helicopter and a vimana craft is the effect of movement (translation) being applied to the entire content of the vessel (matter, on the atomic level). Everything that is situated inside the repulsion effect (miniature magnetosphere or repulsion field) moves together. Whether it is the structure, the passengers, cargo or equipment and stuff, everything moves the same way at the same time. Therefore, there is no difference between the force of gravity (resulting from acceleration and deceleration) acting on the vessel and its content. Also, the vimana craft is entirely automated (computerized), very little “human input” is required.
The above explains the very basics. Vimana craft (coil-like vessel) has many more properties (physics and plasma physics) allowing for its complex versatility. Those are more technical, they are explained in Maxwell’s equations and other works referring to electromagnetism.
Outer foreigners vimana is an outstandingly intricate vehicle, and to realize all its capacities anyone would be totally mesmerized (beside all technical instruments it is equiped with). Personally, I have the utmost admiration toward that vessel and its designers.
On the other hand, I do consider the greatest technological achievement earthlings have ever made (before the computer) is the helicopter craft. Sikorsky's design was so advanced he had to wait 20/30 years for the industry being able to actually manufacture essential elements for constructing the helicopter. Though limited in speed, this craft is inherently made for humanism purposes. Number of lives the helicopter has saved is unmatched. This is one thing earthlings can be proud of.
-[DataJY]- © 2011.
No doubt they are monitoring a large part of the sector while in flight, because they are responding to people utilizing a video camera (adjusted positioning). Often times they slow down and change course. When the event is more or less isolated and the subject/witness is calm enough, the pilot maneuvers the vimana toward the camcorder. More than that, they operate in function of what is in the viewfinder! The movements the craft makes shows clearly the pilot is able to actually see what the cameraman is seeing. To do that, one of their sensor-rays are tuned to the video signal inside the camera, between the CCD pick-ups and the viewfinder monitor. It picks up that signal and displays it on a screen inside the vimana for the pilot to look at it. With that, he can move his craft slowly to the left waiting for the witness to pan and follow. Then he does the same to the right.
Example (adjusted positioning):
See the video at the end of this text.
Moving very slowly or just standing there for minutes while being video recorded shows how much they are in control, they have the hand. Both takes showing them vessels accessing mass inversion state and disappearing to our visual senses (wavelengths) are certainly intentional. Like would do a movie director, they wait precisely the moment when the shot is perfect: not too far, not too close, in focus, the camera not oscillating, quite standard framing.
A laser beam is reflected by the topology of the site, or by any object. This could be utilized for mapping an area like our satellites are doing on planets. However, outer foreigners have much better means for that purpose. Depending on the changes in wave length to the reflected part of the beam (returned signal), they can be measuring components in the soil and vegetation. It is always difficult to discern what it is exactly they are probing and recording because we do not perform those types of operations. When the laser beam flashes bright on the camera lens, it means they are directly pointing at it. Again, they know they are being video recorded and they let us know that. This is a form of interaction!
Of course with their technology, they could avoid being spotted and always remain hiding or leave long before anyone comes near. Being perfectly aware outer foreigners are totally allergic to sudden unexpected occurrences, unforeseen outcomes, I do understand they have a natural tendency to control and to plan everything down for reducing the number of probabilities. Thus, the real video shots are voluntary contributions from their part.
Since real occurrences happen unexpectedly (on the witness part), the camera does not stand on a tripod. The image is severely unstable (even more when zooming very close). But the “object” itself is perfectly stable on the picture frame. The three (3) dimensional positions and environment: the Background (clouds) always remain behind the “object”, the Foreground (trees) always remain before the “object”, and therefore, the Object location is consistent. Because the “object” is a vessel, it has a Mass and an Inertia. Regardless what kind of propulsion is utilized, it has to struggle with the mass. This means a vessel can not stand nor translate at low speeds absolutely motionless. Especially while hovering. Constant adjustments has to be applied (compensations), no matter how small they are. Piloting these vessels is like operating a helicopter, which is inherently unstable, except theirs is done by computers. Therefore, the “object” oscillates slightly up and down, and to the sides. Because the camera is unstable (sadly), this is often times difficult to discern, though it is always there. Also, the vessel will bank a little right and left, and readjust regularly as if it was trying to stay horizontal on a needle. This attitude is very different than an object being suspended by a string (on the top), the oscillations would be inverted. The inertia is the tendency of an object (mass) translating to keep on moving in the same direction. It can be seen as a “resistance” to change its direction. A vessel at low speeds will show a curve as it is modifying its trajectory (turning) or its altitude (up and down). It will not invert suddenly its direction of translation. Translation at ultra-high speed is very different. And since it requires advanced technological details, lets only consider the transition from low to ultra-high speed, and vice versa. When a vessel suddenly changes to ultra-high speed from slow speed, it goes away in a straight line or a constant curve, and its size reduces correspondingly to the distance. The disappearing (fading out) of the vessel is very laborious to explain as well (mass polarity inversion). Lets only consider that there must be no alteration to the image (frames, pixels), like pasting and erasing. The pixels definition remains unaltered. And since the electromagnetic effects are affecting the camera pick-ups (CCD), it is adding to the confusion. [This is the reason why films (no CCD) are the best] Finally, the “faint halo” surrounding the object shows a rotating composition. I know what direction a current is going inside an electromagnetic field, this is pure physics, thus the rotation has to correspond with that. These five (5) elements are extremely difficult to simulate. Only huge complex computers (like those utilized in weather forecast) could model all these at the same time, in a manner that it would be practically impossible to sort it out. And these are not available to freaks (hoax creators)!
Video shots of real outer foreigner’s vimana and probe are very rare. Only expert’s eyes can spot those among the vast quantity of hoaxes. To the best of my abilities, only those I suggest here are presenting each and every characteristics to real outer foreigner vimana.
A- Display of presence (China):
B- Responding to a cameraman (Milan):
C- Observing (France):
D- Just being seen (Argentina):
E- Display of presence:
F- Responding to a camera (Texas):
G- Caught probing a site (Italy):
H- Playing with the cameraman (Glasgow):
I- Display of presence (Nan Jing):
J- Transiting (Sarajevo):
K- Surprising the people (Bosnia):
L- Examining a building:
M- Laser-Beam (2010):
Addenda -[DataJY]- © 2011.
Since several communications (email) have been questioning how such a vessel could be piloted, I am publishing here my general response to that (For more details, see: The A.M.V.C. Model; Electromagnetic Field Drive Vehicle section).
Vimana craft Controls.
From a pilot’s point of view experienced with both fixed-wings and rotary-wings aircrafts,
Understanding the inherent dynamics in the EM Field Drive mechanism (electromagnetic properties: attraction/repulsion) and considering Maxwell’s equations,
Considering Lieutenant Plantier’s description,
In accordance with numerous accounts from witnesses,
controlling a vimana craft is very similar to operating an helicopter.
Though basic principles are extremely different in their nature, both results are similar: the main propulsion force acts downward directly below the craft.
- The helicopter has horizontal blades (horizontal plane) and its clockwise rotation creates lift (pushing downward). The rotation of the blades (horizontal plane) is maintained at a particular speed, which does not change. Adjustment to the blade's angle of attack (AoA) modifies the strength of the lift (pushing downward) so the helicopter climbs up, holds level altitude, and descend. Changing the angle at which the horizontal blades are turning on the axis (its plane), its inclination or tilt determines the direction of translation to the craft. When the horizontal rotation plane tilts forward, backward, to the right or left, the helicopter moves to the same direction. Because of the inherent inverse rotation reaction on the craft from the horizontal blades turning at high speed (the craft tends to rotate counterclockwise), there is a set of blades positioned on a vertical plane (to the back) for compensation to this rotation reaction by adjusting the blade’s angle of attack. Also, adjusting these vertical rotating blades makes the helicopter turn right or left more precisely. Thus, there are three main controls: 1- The Lift (Collective, or up and down), 2- The Direction of translation (Cyclic, or direction by tilting the entire craft), 3- The Compensation to the counter-rotation (Anti-Torque or pitch of the tail rotor blades).
- The vimana (coil-like mechanism) has a circular particle accelerator (like a ring) around a central pole and rotation of particles creates a miniature magnetosphere that reacts with any local magnetosphere (repulsing: pushing downward). The speed of the particles in the accelerator must be constant (light speed, electricity) for maintaining the miniature magnetosphere. Because the repulsion force or effect (acting downward and pushing upward) is constant by definition, a Damper-screen is positioned below the vimana craft. It functions like a diaphragm in a camera, but its diameter is adjusted rather than its aperture. This Damper-screen is acting as an attenuator to the repulsion force, it reduces its effect (damping) where it is positioned. When the vimana craft is on the ground and the particle accelerator is powered, the Damper-screen is set to its wider diameter (below the craft) and its attenuating effect is the strongest, so the repulsion effect is totally suppressed. Reducing the Damper-screen diameter allows more repulsion effect outward (below), so the vimana craft lifts up. Maintaining this configuration makes the vimana hold altitude. Sliding the Damper-screen forward allows more repulsion effect backward, the entire vimana craft tilts toward the front and translates in that direction. Because the repulsion effect is not centered under the vimana anymore, the intensity directly below is weaker. For maintaining altitude, the intensity of the repulsion effect must be increased, so the Damper-screen diameter is reduced a little more for compensation (increasing the repulsion effect below the vimana craft). Maneuvering the Damper-screen diameter (degree of attenuation) and position (direction of repulsion) under the vimana craft allows to control its attitude and speed. Thus, there are two main controls: 1- The Lift (Damper-screen diameter, or up and down), 2- The Direction of translation (Damper-screen position, or direction by tilting the entire craft). Compensation to the counter-rotation (Anti-Torque) is not required. This mechanism is acting like a gyroscope, it makes the overall structure of the vimana craft (nose) follow the direction of translation. However it can be made to rotate on itself (yaw) independently.
The major difference between an helicopter and a vimana craft is the effect of movement (translation) being applied to the entire content of the vessel (matter, on the atomic level). Everything that is situated inside the repulsion effect (miniature magnetosphere or repulsion field) moves together. Whether it is the structure, the passengers, cargo or equipment and stuff, everything moves the same way at the same time. Therefore, there is no difference between the force of gravity (resulting from acceleration and deceleration) acting on the vessel and its content. Also, the vimana craft is entirely automated (computerized), very little “human input” is required.
The above explains the very basics. Vimana craft (coil-like vessel) has many more properties (physics and plasma physics) allowing for its complex versatility. Those are more technical, they are explained in Maxwell’s equations and other works referring to electromagnetism.
Outer foreigners vimana is an outstandingly intricate vehicle, and to realize all its capacities anyone would be totally mesmerized (beside all technical instruments it is equiped with). Personally, I have the utmost admiration toward that vessel and its designers.
On the other hand, I do consider the greatest technological achievement earthlings have ever made (before the computer) is the helicopter craft. Sikorsky's design was so advanced he had to wait 20/30 years for the industry being able to actually manufacture essential elements for constructing the helicopter. Though limited in speed, this craft is inherently made for humanism purposes. Number of lives the helicopter has saved is unmatched. This is one thing earthlings can be proud of.
-[DataJY]- © 2011.
What are they working on?
In addition to discharging flashes of light (light radiation), lately Outer Foreigners have been seen releasing "things" into the atmosphere. Some are streams or groups of spheres (acting like Brownian motion) and segments of material (Wiener Sausage), others look like flares.
What could these things be for?
Those "flares" are certainly producing a chemical reaction of some sort. The flare itself is a chemical reaction. What are they reacting with? Or why are they reacting? What is the result of that reaction? Are they sweeping the atmosphere in some ways?
-> Video <-
What could these things be for?
Those "flares" are certainly producing a chemical reaction of some sort. The flare itself is a chemical reaction. What are they reacting with? Or why are they reacting? What is the result of that reaction? Are they sweeping the atmosphere in some ways?
-> Video <-
![[DataJY]](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgEllZwRCYqIIvfczgCb7fdbKh1xjf5F56n4C-8rmGutlEpU5CUEvzl2mOcgt8CKrwF8Y9TcfPQNxXAI-vXV5tf-gQ2BWYN1abKx14Ax8MKUb_z-pJZ-LU_fqiNj_JzNoLU1KdnIs9ykpPe/s220/DataJY-1.jpg)
![-[ DataJY ]- WEB SiTE](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEiGPudrXIoRZBXncKrPqEBzx2vNWhyphenhyphenx6k7JhxBWcE-YHGqvScjiqoFyABiMuApXz_J_WiFQ-VrxjqIohgTqxBHVr-d_Ob4vDOiyD6nW_sKC5cWQgmzQVGrvVeZCtdKzaJHsYx2vyit20fL_/s220/DJY-HP1.jpg)
No comments:
Post a Comment